The Journal
Product deep-dives, customer builds, and everything forged β straight from the shop floor.

Lug Torque on Aftermarket Wheels: What to Use and What to Avoid
The torque figure belongs to your car, the seat type belongs to the wheel, and getting either wrong is how wheels come loose.

Will Aftermarket Wheels Clear Your Big Brake Kit?
Diameter is only half the story. Spoke clearance is what stops a wheel fitting, and here's how to check it before you order.

Do Wider Wheels Actually Give You More Grip?
A wider wheel doesn't create grip on its own, and the contact patch doesn't grow the way you think. Here's what genuinely changes.

Center Bore and Hub Rings: The Five-Minute Explanation
The hub doesn't carry the car. It locates the wheel, and that's why a $15 ring prevents a vibration you'll spend hundreds trying to diagnose.

Replica Wheels and Fake Forged: How to Tell Before You Buy
A replica and a fake forged wheel are two different risks. Here's how to tell them apart with a scale, a torch and five minutes.

What Wheel Concavity Actually Is (and When It Matters)
Concavity is the curve of the face, not the depth of the lip. Here's what creates it, what limits it, and what it costs you in brake clearance.

Audi R8 Fitment: Gen 1 and Gen 2 Wheels Are Not Interchangeable
Both generations share a 5x112 bolt pattern and a 57.1 mm bore. That doesn't make the wheels interchangeable, and here's exactly why.

Toyota Supra A90: 18 vs 19 vs 20 Inch Wheels
18 for sidewall, 19 for balance, 20 for the look. Here's what each actually costs on a Supra A90, with sizes that keep your speedometer honest.

Do Wheels Hurt Tesla Model S Plaid Range? What Actually Costs You Miles
Tesla's own configurator shows the range drop when you pick bigger wheels. Here's which part of the wheel is responsible, and which part isn't.

Do You Need an Alignment After New Wheels? An Honest Answer
Strictly speaking, no. Practically, there are four situations where skipping it costs you a set of tires, and one where it costs you a lot more.

Wheel Fitment for the Cadillac CT5-V Blackwing
A 668 hp rear-drive sedan with big Brembos and 4,100 pounds to carry. Here's what the car actually demands from a wheel, and the sizes that work.

Choosing Wheels for the BMW 5 Series (G60)
The G60 is heavier than the car it replaced, and the i5 adds another few hundred pounds. Here's how that changes what you should put on it.

Why Monoblock: The Case for One-Piece Forged
Multi-piece wheels get the attention, but a single forged billet is still the strongest, stiffest way to build a wheel. Here's why our core line starts there.

Customer Build: Centerlock GT Setup, Track Ready
A look at a recent centerlock build β forged GT16 wheels engineered around a big-brake package and a weekend track habit.
